[Product Ingredients and Uses]
Widely used for decorative repairs and renovation painting on interior and exterior walls, ceilings, drywall, and wooden partitions in residential buildings, schools, offices, hotels, etc. It is especially suitable for small-area touch-up applications. It can also be used for DIY personalized artistic painting, as well as for creating signs and markings in indoor public spaces.
[Usage Instructions]
1. The surface to be sprayed must be free of dust, grease, water wax, or other contaminants. Protect surrounding areas.
2. Before spraying, shake the canister up and down until the steel ball inside makes a sound.
3. Hold the spray can at least 20 cm away from the surface to be sprayed and press the nozzle to spray evenly. Do not spray upside down.
4. Use a "light coat, multiple sprays" method. Wait 3-5 minutes between coats, and after multiple applications, the color coverage will improve.
5. After use, invert the can and press the nozzle for 3 seconds to clean any residual paint from the nozzle and prevent clogging.
6. For disposal of the empty can, invert the can and press the nozzle for 2 minutes to clear any remaining paint. If necessary, remove the nozzle to thoroughly clean it.
[Precautions]
Keep out of reach of children.
When spraying, the aerosol can must be held upright, and the angle between the can and the horizontal surface should not be less than 45 degrees.
Use in a well-ventilated area.
In case of eye contact, rinse immediately with clean water and seek medical attention.
If swallowed accidentally, induce vomiting immediately and seek medical attention.
This product is water-based, but the can contains pressurized gas. Keep away from heat sources and high temperatures. Do not puncture or burn the can.
Avoid using in environments where the temperature is above 80°C or below 5°C, and humidity exceeds 85%
